AutoMobile 4.01


Installation and Upgrade

AutoMobile runs on all Palm OS handhelds with at least Palm OS 3. It
supports high-res displays and Palm OS 5. To install, simply unpack
the automobil.zip archive and double click on the AutoMobil.prc
program.

You can install new versions of AutoMobile on top of previous versions
without data loss.

If you ever need to reinstall AutoMobile on your handheld e.g. after a
crash or hard reset you should also install the backup data stored in
the file ...palm\\backup\AutoMobilDB.pdb.

At the very first start AutoMobile shows you the preferences screen.
Make sure your home currency and the units for entering and displaying
data are correct. You can change all settings later on.

After setting the preferences you should enter the initial mileage for
your car. This value will be used as the basis for all further
calculations. The initial mileage should be the odometer value at a
full fill-up, so you can start with a clean value for usage or fuel
economy measurement. Do not enter any cost or fill-up for the first
value.

Data Entry

For a given date, you can enter the mileage (total or since last
refill), price, and/or amount of fill-up. To change values, tap on the
digit buttons, enter the number with Graffiti, or use the 5-way
navigator to increase/decrease values and move to the next/previous
digit.

If you enter the price per gal, AutoMobile will automatically
calculate the total price from the fill-up value or vice versa.

To enter maintenance or repair costs, just leave the fuel value at
zero.

You can change the category of this entry or attach a note.You can
also enter negative costs (credits/reimbursement) through the menu on
the main screen.

You can temporarily switch the input unit for fuel from gallons to
liters, e.g. when you travel uproad.

The key with the hand symbol opens a special input dialog with extra
big buttons, e.g. for finger input. This will ask for date, mileage,
cost and fuel value, consecutively. Instead of the total mileage, you
can also enter the delta (day) odometer value, and instead of the
total price, you can also enter the fuel price, AutoMobile will
calculate the other value automatically.

Note: If you have a large back log of entries, you may want to use the
Windows Import/Export tool to import this data into AutoMobile.

Partial and Forgotten Fill-Ups

If you're only doing a partial fill-up (e.g. refilling for $ 10), tap
on the tank icon until it shows a half filled tank (). Partial
fill-ups will be summed up until the next full fill-up and statistics
will be calculated accordingly. The current average can not be
calculated if the tank is not completely filled.

If you forgot the last entry or someone else did the fill-up, tap on
the tank icon until it shows a tank with a question mark () Fill-ups
after a missing entry do not count in the fuel economy calculation
(but the costs will be summed up). Fuel economy statistics will be
continued at the next full refill.

Statistics

AutoMobile calculates various statistics. The current fuel economy or
consumption is calculated by summing up all partial and the last full
fill-up and dividing the total distance driven since the last full
fill-up by this sum (or vice versa).

Cost per month is the estimated (averaged) value based on the total
cost. Recurring costs are taken into account for the time span for
which they are due.

Costs per mile is the total cost divided by the total driven distance.

The estimated next fill up distance is calculated from the largest
refill and the current fuel economy. If the estimate seems way off,
check the log to see if there is an excessive refill value (e.g. by
combining two refills into one entry).

Note that the averages may be inaccurate in the first 1-2 months, when
not enough data is available. They will become better and better the
more data you enter.

More detailed statistics are available through the menu AutoMobile -
Statistics. You can drill down by category, time span, or both.

Log View

AutoMobile stores all entered data in a log. You can display various
values in the three log columns. The distance column displays the
distance to the previous entry in the currently selected category.

If you inadvertently entered something wrong you can modify or delete
your entries.

The log (as it is currently displayed) can be exported as a MemoPad
entry or CSV file, or analyzed on the desktop with our Windows Import
Export utility. You can also beam all data of the currently selected
car to another handheld.

Charts

AutoMobile can display graphs for usage and fuel economy, monthly cost
and distance, and fuel price. You can horizontally zoom in and out of
the data. The average value is indicated by a dotted line. A thick
blue line indicates a smoothed average of the data and can be used to
easily spot trends in the data.

Tapping on a point in the graph displays the value of the closest data
entry.

Cost and mileage percentages per category will be displayed AutoMobile
as pie charts. Tap on a pie fragment to show further details.

Preferences

If you prefer, you can choose different units for entering and
displaying data. Internally, all values are stored in the unit you
select for Enter. You can switch the Display unit any time to see the
values in a different unit.

When you change an input unit or the currency name, you'll be asked
whether you want the data to be converted or not. Note that each
conversion may introduce small round-off errors.

If you select different units for entering and displaying fuel, you
can also select the conversion factor (imperial vs. standard gallons).

Select Start With Input Dialog to have the input dialog always
displayed when you start AutoMobile.

Select Preset Last Input to have AutoMobile remember previous entries
on a per category basis. For normal entries with refill and cost
value, the fuel price will be preset. For entries without a fuel
value, the total cost will be preset (e.g. for car wash entries).

Select Use Big Button Input if you want to create new entries with the
finger input form by default.

Reminders

You can schedule reminders e.g. for maintenance or oil change. The
reminders will be checked whenever you start AutoMobile or enter a new
odometer value. You can add new reminders based on odometer value,
date or both odometer and date (whichever comes first). Events
occurring at regular intervals, like oil change, can be entered as
repeated events.

Recurring Costs

If you have costs that occur at regular intervals, like insurance fees
or amortization of costs, you can enter them as recurring costs. Each
recurring cost has an interval in which it occurs, and a repeat type
(monthly, quarterly or yearly). Based on these settings, recurring
costs are summed up for the total and average monthly cost as well as
for the cost per mile/kilometer.

Multiple Currencies

You can define up to 5 additional currencies for entering costs. For
each currency, you specify the exchange rate to the home currency that
you defined in the preferences. Internally, all costs are converted to
and stored in your home currency.

Import/Export

If your handheld is equipped with an expansion card, you can import or
export your data as CSV (comma-separated values) files. CSV files can
be processed by all major office suites. Please make sure the correct
field separator is set in the import/export dialog (usually comma ,).

You can import/export regular entries from the log screen (menu Data -
Import/Export CSV File...). Recurring costs or reminders can be
imported/exported on their respective lists. Import will check for
already existing entries to avoid duplicates.

You can import or export data in XLS or CSV format on your Windows
desktop with the AutoMobile Import Export utility. Run the setup, then
select your Palm user and click on Import or Export.

Export will export the currently selected AutoMobile car data into a
CSV or Excel file.

Import will import a CSV or Excel file into an AutoMobile database and
will install that database on the Palm. In the File Open dialog, below
the import file name, select the car name under which your data should
appear. If you select an existing car name, data for that car will be
overwritten.

Shareware Registration/License

AutoMobile is shareware and must be licensed (registered). Please
purchase an AutoMobile license for just US$ 19.

Please contact us for volume discounts or site licenses.

Version history

- 4.01 - Important bugfix: in rare cases, entered costs were not
  stored - In the big finger input form, you can alternativel enter
  the day odometer value instead of total odometer, or fuel price
  instead of total price- Minor fixes
- 4.0 - CSV import/export from/to expansion card - Finger input form
  with big buttons - Calculate fuel economy already during input -
  Enhanced detailed statistics screen - Improved check against wrong
  input (mileage too low/high)
- 3.2 - Enhanced detailed statistics screen - Improved check against
  wrong input (mileage too low/high) - Increased accuracy for internal
  storage of fuel, results in less rounding errors - Fuel price is
  always rounded towards 9 as last digit - Pie charts also for
  grayscale devices - Manages now up to 20 cars
- 3.1 - Support for Tungsten T3 virtual silkscreen in log and graph
  view - Switch input of gallons or liters temporarily in input form
  (e.g. when travelling between U.S. and Canada) - Display beginning
  of note in Log column - Pie charts for costs and mileage per
  category (on color displays only) - Smoothed moving average in
  charts for better trend recognition - Categories for recurring costs
  - Recurring costs are now correctly included in all calculations and
  charts - Better support for negative total costs (if you get
  reimbursed for your travels)
- 3.0 - many improvements, e.g. increased input of fill-up to three
  fractional digits, better keyboard support, fuel price in log,
  option to remember last input on a per category basis, improved
  preferences dialog, support for Tungsten T five-way navigation in
  input, searching in notes (inside AutoMobile only), improved
  graphics zoom, min value no longer fixed at zero
- 2.3 - negative costs (credits), increased accuracy for cost per
  mile/km, OS 5 ready, small bug fixes and enhancements
- 2.2 - graphics, estimated mileage for next refill, small bug fixes
- 2.01 - lots of bug fixes
- 2.0 - completely rewritten, new database layout, improved log view,
  support for categories, recurring costs, multiple currencies, Euro,
  beaming of data
- 1.6 - enter digits with graffiti, modify past entries, price per l
  or gallon
- 1.5 - scheduling of maintenance events
- 1.4 - total costs up to 9,999,999, native number format, long
  remarks, partial and forgotten refill
- 1.3 - bug fixes, remark history popup, fuel economy independent of
  l/gal and km/mi
- 1.2 - bug fixes, support for mi and gal
- 1.1 - first public version

Many thanks to Yukimasa Matsushita for translating the Japanese
version, Andrea Camisasca for the Italian version, Marco Malka Y Negri
for the Portuguese version, Leonid Karachew for the Russian
translation, Diego Astuy Gonzlez for the Spanish, Thomas Malm for the
Swedish translation, Joop Dekkers for the Dutch translation, Mirek
Buczma for the Polish translation.

Copyright (c) 1998-2006 LinkeSOFT GmbH, Berlin, Germany

License
-------

This license agreement settles the relation between LinkeSOFT GmbH and the 
user concerning the use of the enclosed software product ("program") of
LinkeSOFT in its shareware version and its registered version.

 1
The user obtains through this license by LinkeSOFT the non-exclusive 
right to install and use this program on his PalmPilot.
The program remains the sole property of LinkeSOFT.
The user further obtains the right to make a back-up copy by means of 
the HotSync feature.

 2
The user may distribute the shareware version of this program or copies 
thereof. The shareware version may be published on the Inter- or 
Intranet or on software collections (on CDs etc.).
Each distribution must contain these provisions and the above copyright
notice. Except for publishing on software collections the distribution 
of this program has to be free of charge.
The program name or the name of LinkeSOFT shall not be used for
promotional purposes without prior written consent of LinkeSOFT.
The program may not be modified or tampered with in any way.

 3 THIS SOFTWARE IS PROVIDED BY LINKESOFT GMBH ''AS IS'' AND ANY 
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL LinkeSOFT BE LIABLE FOR ANY 
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGE.

 4 For regular use the program has to be registered according to the 
general rules about shareware. Registration is made by payment of the 
registration fee according to the program and web site instructions. 
After registration the user receives a key that entitles him or her to 
unrestricted use of the program according to this license. Registration 
further entitles the user to get support by LinkeSOFT via email.

 5
The user shall in no way make copies of the registered version of this
program, except such as coming under  1. The user shall in no way 
resell or lend the registered program or copies thereof to third persons.
The registered program may not be made available to third persons.

 6
In the event that any provision of this Agreement should be or become 
invalid or if there is a gap in the Agreement, the validity of the other 
provisions shall not be affected. In lieu of the invalid provision or in 
order to complete the Agreement, a reasonable provision shall be 
effective approaching to what parties would have agreed upon if they had 
considered that issue.

 7 This Agreement shall be governed and construed in accordance with 
German law as it applies to German citizens and corporations and the 
parties hereby agree to submit to the exclusive jurisdiction of the 
courts of Germany. The place of proceeding will be Berlin.

 8
This software program is protected by international copyright law.

Palm, the Palm logo and Graffiti are registered trademarks,
and HotSync, PalmPilot, Palm OS and the PalmPilot logo are trademarks of
Palm, Inc.
